|
MT-70 / MT-80 / MT-100 PUMPS
|
||||
| Centrifugal and vertical pump models
"MT" are special indicated for fresh or salty water.
compact, space-saving and rugged desing
PLEASE CONTACT US FOR ANY OTHER FLOW COMBINATION |
||||
| Model: | Max. flow | Max. pressure | Max. Intensity | |
| MT-70 | Motor of 10 Hp 220-380 III 50hz. | 36.000 lts/h | 5,0 kg./cm2 | 14,5 A |
| Motor of 15 Hp 220-380 III 50hz. | 36.000 lts/h | 6,0 kg./cm2 | 21,5 A | |
| MT-80 | Motor of 15 Hp 220-380 III 50hz. | 55.000 lts/h | 4,8 kg./cm2 | 21,5 A |
| Motor of 20 Hp 220-380 III 50hz. | 55.000 lts/h | 6,1 kg./cm2 | 25,5 A | |
| MT-100 | Motor of 15 Hp 220-380 III 50hz. |
90.000 lts/h |
4,6 kg./cm2 |
21,5 A |
| Motor of 20 Hp 220-380 III 50hz. |
90.000 lts/h |
3,0 kg./cm2 |
25,5 A | |
|
It is possible supply 250-440 III 60hz motors |
||||
|
Flow curve: |
||||
| FRESH WATER GENERATORS THAT USES: | ||||
| MT-70 | TCS 6 (condenser)/ TCS 8 / TCS 10 / | |||
| MT-80 | TCS 10 / | |||
| MT-100 | ||||
 |
|
| Tecnical characteristics: | |||
|
MT-70 |
MT-80 | MT-100 | |
| Inlet: |
Ø 70mm. Flange Ø 185mm. 4 holes of Ø18 in Ø145 |
Ø 80mm. Flange Ø 200mm. 4 holes of Ø18 in Ø160 |
Ø 100mm. Flange Ø 220mm. 4 holes of Ø18 in Ø180 |
| Outlet: |
Ø 70mm. Flange Ø 185mm. 4 holes of Ø18 in 145 |
Ø 80mm. Flange Ø 200mm. 4 holes of Ø18 in Ø160 |
Ø 100mm. Flange Ø 220mm. 4 holes of Ø18 in Ø180 |
| Motor: |
ABB 10 /15 Hp 3.000 rpm or similar |
ABB 15 /20 Hp 3.000 rpm. or similar |
ABB 15 /20 Hp 3.000 rpm. or similar |
| Hosing and cover: |
Bronze RG-5 |
||
| Impeller: |
Bronze RG-5 |
||
| Shaft: |
stainles steel |
||
| Mecanical seal: |
25 mm stailes steel and bronze |
25 mm /28 mm (20 CV) stailes steel and bronze |
28 mm / 32 mm (20CV) stailes steel and bronze
|